Δίσκος τεμαχιστικής polycrystalline diamont tiped με ειδική οδόντηση κατάλληλος για τεμαχιστική κάθετη και οριζόντια,τέλειο φινίρισμα με υψηλή ταχύτητα τροφοδοσίας και μεγάλη διάρκεια ζωής εργαλείου.Αριστη κοπή σε μελαμίνες,MFD,SOLID WOOD PANEL,HPL LAMINATE,OSB,WOOD RMMA,POLYETHYLENE,HIGH GLOOS FILM,POPLAR.
D=Διάμετρος δίσκου, d=Tρύπα δίσκου, Κ=Πάχος δοντιών p=Πάχος στελέχους Ζ=Αριθμός δοντιών a=μοίρες δοντιών
D190 d30 FT2/7/42 Z24 K2,5 a10° HR
APPLICATIONS: for sizing cuts, perfect finishing with high feed rate and long tool life.
MACHINES: chop saws and portable machines, table and vertical panel sizing saws, CNCs and through-feed installations.
Thanks the new minimization of gullets design this blade succeeded in reducing the noise of idling by up to 15 dB(A) compared to conventional carbide saw blades. With a noise level of just around 70dB(A) when idling, the wearing of hearing protection is outdated.
New industry standard with universal application in countless materials and suitable for all chop saws an and portable machines, table and vertical panel sizing saws, CNCs and through-feed installations.
The special hollow back tooth configuration (HR) guarantees an excellent cutting quality.
The teeth are surprisingly thin! The cutting width is a mere 2,5 mm and they generate noticeably lower cutting pressure and therefore also require less power during usage. Resharpenable max 2 times.
The lifetime is 20X longer than carbide blades thanks to the diamond tips.
Μade in Italy.
TM: CMT, the CMT logos, CMT ORANGE TOOLS and the orange color applied to the tool surfaces are registered trademarks of C.M.T. UTENSILI S.p.A.